Resources
Last updated: October 2026
Quick answer: Reference tables and tools for choosing and specifying plates — size charts, the CTP compatibility matrix, cost calculator and the plate test protocol. Most spec questions are answered here before you need to email.
Selection guides
- Plate selection guide — imaging type, coating layers, ink and run length in one decision flow.
- CTP machine selection guide — thermal vs UV vs violet, format, automation level and plate compatibility.
- Plate storage guide — temperature, humidity, light, stacking and stock rotation for offset and flexo plates.
Checklists
- Quotation checklist — what to send for an accurate quote on plates, flexo plates, machines and chemicals.
- Machine installation and acceptance checklist — site preparation and the tests to run after installation.
- Plate processor maintenance — daily, weekly and monthly care for your processor.
- FAQ — short answers on ordering, samples, plates, machines, shipping and support.
Specification tables and tools
- Plate size chart — standard thicknesses from 0.15 mm to 0.40 mm and size ranges by press format.
- Flexo plate thickness guide — which flexo gauge suits labels, flexible packaging and corrugated.
- CTP glossary — CTcP, processless, LAMS, dot gain and other prepress terms explained.
- CTP compatibility matrix — platesetter wavelengths, processor matching and exposure settings.
- Plate cost calculator — cost per plate and per job from size, volume and freight.
- Plate test protocol — how to run a trial plate and judge the result.
- Blog — comparisons, troubleshooting and buying guides written by our technical team.
For anything the tables do not answer, contact us — a spec question gets a technical answer, not a sales reply.
Disclaimer: reference values are typical; confirm production specifications in the TDS or quotation.
